Код ошибки
|
Описание
|
F10-1
|
Paper feed or duplex communication problem
|
F10-2
|
Paper feed or duplex communication problem
|
F10-3
|
Paper feed unit connection problem
|
F10-4
|
Internal temperature problem
|
F18-1
|
Upper feed lift problem
|
F18-2
|
Lower paper feed lift problem
|
F18-3
|
Upper paper feed lift problem
|
F18-4
|
Middle paper feed unit problem
|
F18-5
|
Lower paper feed unit lift problem
|
F28-1
|
Transfer separator corona
|
F28-2
|
Charge corona
|
F34-1
|
High fuser temperature or bad thermistor
|
F34-2
|
High fuser temperature
|
F35-1
|
Low fuser temperature or open thermistor
|
F35-2
|
Low fuser temperature
|
F36-1
|
Low fuser temperature
|
F42-1
|
Scan forward problem
|
F42-2
|
Scan home problem
|
F42-3
|
Scan problem
|
F43-1
|
Exposure lamp board problem
|
F43-2
|
Exposure lamp board problem
|
F43-3
|
Exposure lamp board problem
|
F44-1
|
Optics communication problem
|
F45-1
|
Lens home problem
|
F45-2
|
Mirror home problem
|
F51-2
|
Main motor speed problem
|
F52-1
|
Cooling fan problem
|
F52-2
|
Suction (transport) fan problem
|
F52-4
|
Optics cooling fan problem (2 fans; could be either one)
|
F60
|
Communication interruption between machine and RADF
|
F67
|
RDH or RADF pressure home sensor or pressure motor.
|
F70
|
Communication problem between machine and sorter
|
F76
|
Stapler problem
|
F77
|
Sorter bin problem
|
F78
|
No memory card installed
|
F80
|
Communication problem between machine and weekly timer
|
F81
|
Communication problem between machine and memory card
|
F97
|
Duplex up down plate problem
|
F98
|
Duplex guide plate problem
|
F99
|
Duplex indexer problem
|
J10
|
Feed jam
|
J11
|
Upper feed jam
|
J12
|
Lower feed jam
|
J13
|
Upper paper feed unit jam
|
J14
|
Lower paper feed unit jam
|
J15
|
Duplex feed jam
|
J17
|
Jam in machine
|
J17-7
|
Jam at paper feed unit exit
|
J18
|
Jam in machine from middle tray of paper feed unit
|
J31, J32
|
Exit jam
|
J61
|
RADF opened during run, or other RADF jam
|
J62
|
RDH/RADF jam
|
J63
|
RADF feed jam
|
J72
|
Sorter jam or open interlock
|
J74
|
Finisher problem
|
J75
|
Stapler problem
|
J92
|
Reversal sensor jam
|
J97-1
|
Stacker entrance jam
|
J97-2
|
Stacker entrance jam
|
J98
|
Stacker entrance jam
|
P17
|
Right side door open
|
P19
|
Paper feed unit door open
|
P33
|
Exit door open
|
P51
|
Front door open
|
P61
|
RADF cover open
|
P64
|
RADF not opened to remove originals
|
P68
|
Original removed during operation of the RADF
|
P69
|
Original didn't feed during RADF/RDH operation
|
P71
|
Sorter interlock
|
P74
|
51 copies or more went to the stapler or paper was in the sorter/stapler, or different size originals were used in the staple mode, or more than 25 copies per bin were attempted by the stapler.
|
P76
|
Out of staples
|
P78
|
Stapler not installed
|
P81
|
Key counter not plugged in
|
P82
|
Memory card not installed, not formatted to Konica specs, or no machine serial # registered on memory card.
|
P86
|
No toner waste box
|
P91
|
Duplex unit pulled out
|
P96
|
Paper in duplex tray
|
P97
|
Bypass was used or attempted during duplex
|
P99
|
Too many reverse side copies during duplex
|
